Concrete slab cost in Wisconsin for 200 sq ft
| Typical total$6.97 per ft² of slab | $1,395 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $858 – $2,361 |
| Labor portion50% of the job — this is the part that moves by state | $697 |
| Material portion50% — bought at national prices | $697 |
| Cement Masons and Concrete Finishers pay in Wisconsinabout $33/hr · BLS OEWS May 2025, SOC 47-2051 | $68,820/yr |
| U.S. mean for the same tradeSOC 47-2051 | $60,050/yr |
| Versus the national priceWisconsin trade pay runs +14.6% against the U.S. mean | +$95 |
Notes
- Where the number comes from. The national price for a poured concrete slab is $6.50 per ft² of slab — poured slab pricing published for 2026, $4–$11 per ft² for a 4-inch slab on grade. Labor is about 50% of that. Cement Masons and Concrete Finishers in Wisconsin average $68,820 a year against a U.S. mean of $60,050 — a factor of 1.146 — so the labor half is scaled by that and the material half is not.
- What is in the price: excavation to grade, a compacted gravel base, forms, wire mesh or fibre, the concrete itself, placing, screeding, a broom or trowel finish, and labor.
- What is not: thickened edges for a load-bearing wall, a vapour barrier under a heated slab, rebar mats where an engineer calls for them, saw-cut control joints past the standard spacing, and any grading or drainage work around the pour. These are the lines that turn a $1,395 quote into a $1,744 invoice, so ask about each one before signing.
- Why state matters more than people expect. Materials ship at national prices; crews do not move. Wisconsin sits above the national mean by 14.6%, which lands on 50% of the job and moves the total by $95.
- Use this as a bid check, not a quote. It prices an average job in an average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a per-unit average.
A 200 sq ft slab in Wisconsin
$1,395 is the typical figure, and bids on the same scope normally land between $858 and $2,361.
That is 200 ft² of slab at $6.97 each.
Why this is not the national number
The same job priced at the U.S. average comes to $1,300 — this one is $95 more.
The reason is one number, and it is a published one. Cement Masons and Concrete Finishers in Wisconsin average $68,820 a year against a U.S. mean of $60,050, from the Bureau of Labor Statistics OEWS release for May 2025, SOC 47-2051. That is roughly $33 an hour of trade pay, a factor of 1.146, or +14.6% against the national mean.
Labor is about 50% of this job. Material is the other 50%, and a box of fittings costs the same in every state it is opened in. So only the labor half is scaled here, and the material half is left at national pricing.
That is the whole model, and it is deliberately simple enough to check: $697 of labor, $697 of material.
Thickness is the line nobody asks about
The figure above prices a 4-inch slab on grade — a patio, a shed floor, a walkway. A driveway that will carry a truck wants 5 or 6 inches with rebar, and that is not a small adjustment: the concrete alone rises by half, and the steel and the extra base come on top. A quote that seems cheap against this page is often quoting four inches for a job that needs six.
Concrete is sold by volume, and the pour is sold by area
A 4-inch slab uses about one cubic yard per 81 ft², so a 200 sq ft pour is roughly the volume you would order. Ready-mix comes with a short-load fee below a full truck and a waiting charge if the crew is not ready when it arrives, and both land on small pours hardest. Two identical patios can differ by several hundred dollars purely on whether the truck waited.
Where the money goes on a small pour
Labor is 50% of this job, and on anything under about 300 ft² the fixed costs dominate: mobilising a crew, forming, and the truck itself cost nearly the same for 100 ft² as for 300. That is why the per-foot price on a small slab looks bad and why adding the walkway you were putting off next year is usually cheaper now than later.
How to use this against a real bid
Three quotes on identical scope should cluster. One well under $858 usually means something was left out of the scope rather than found cheaper — read the exclusions before reading the total. One well over $2,361 is either a harder job than average or a crew that does not want the work and priced accordingly.
The figure above prices an average job in average condition. Access, the age of what is being replaced, the season, and how booked the crew is all move it.
Nearby sizes
Read more
- Bags or a Truck — The Crossover Is About One Cubic YardThe arithmetic is not really about price. It is about how long a slab can sit half-poured before the joint between the halves becomes permanent.
- Concrete Slab Cost by State — 400 ft², All 51The figures price a 4-inch slab on grade. A driveway wants six inches and rebar, and that is not a small adjustment.
- Rebar in a Slab — Spacing, Cover, and Why Position Matters MoreRebar laid on the ground and left there does nothing. It has to be held up into the concrete, and that is the step that gets skipped.
- Paver Base Cost — What the Layer Nobody Sees Actually CostsThe base is a third of the material cost and all of the reason a patio either stays flat or does not.